Toro 04063, Руководство по установке

Страница: 7 / 16

5
Assembling the Wire
Harnesses to the Machine
Parts needed for this procedure:
2 Wire harness
Attaching the Wire Harnesses to
the LED Lights
1. Connect the 2-pin connector of the LED light into
the 2-socket connector of the LED light harness
(
Figure 13 ).
Ensure that the connectors are fully seated
and the latch of the connectors snap together
securely.
g200657
Figure 13
1. 2-socket connector (wire
harness) 2. 2-pin connector (LED light)
2. Repeat step 1 for the other wire harness and
LED light.
Routing the Wire Harness
Route the wire harnesses down each light mount and
up each handle as shown in
Figure 14 .
Note:
Ensure that the wire harnesses are routed
below the differential axle shaft ( Figure 15 ).
g210745
Figure 14
800, 1000, and 1600 Series Machine shown
1. Wire harness
g210746
Figure 15
800, 1000, and 1600 Series Machine shown
1. Wire harness 2. Differential axle shaft
7