Toro 04063, Руководство по установке

Страница: 8 / 16

Connecting the LED Light Wire
Harnesses to the Machine Wire
Harness
800, 1000, and 1600 Series Machines
Note:
Perform the following steps for the LED light
wire harnesses on both sides of the machine.
1. At the back of the console, remove the plug
from the 2-socket connector of the machine wire
harness (
Figure 16 ).
g206149
Figure 16
Left side of the machine shown
1. 2-socket connector (wire
harness—machine) 3. 2-pin connector (wire
harness—LED light kit)
2. Plug 4. Console
2. Connect the 2-pin connector of the LED light
wire harness to the 2-socket connector of the
machine wire harness (
Figure 16 ).
Ensure that the connectors are fully seated
and the latch of the connectors snap together
securely.
3. Perform the previous steps for the wire harness
on the other side of the machine (
Figure 17 ).
g210747
Figure 17
1. Wire harness—LED light
kit 3. Installed 2-pin connector
and 2-socket connector
2. Wire harness—machine
8