Toro 04063, Руководство по установке

Страница: 13 / 16

g032853
Figure 26
eFlex 1820/2120 Machine Shown
1. Opening (control panel) 3. Notch (body—rocker
switch)
2. Rocker switch 4. Back of the control panel
5. Insert the switch into the opening in the control
panel until the switch snaps securely into the
panel (
Figure 26 ).
7
Installing the Cable Ties
Parts needed for this procedure:
10 Cable tie
Procedure
Important:
As you install the cable ties, ensure
that the wire harnesses have enough slack to
prevent stress points and are free from any
moving parts
1. Use 8 cable ties to secure the wire harnesses to
the machine (
Figure 27 ).
Note:
Attach 4 cable ties to the light mounts
and 4 cable ties to the handle.
g200658
Figure 27
800, 1000, and 1600 Series Machine shown
1. Cable tie (8) 2. Wire harness
2. Use the remaining 2 cable ties as follows:
•
800, 1000, and 1600 Series machines:
Secure the LED light kit wire harness to the
harness of the machine with as shown in
Figure 28 .
Note:
Perform this step for both sides of the
machine.
13