tornos MultiAlpha 6x32 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 90

background image

1. Generalities - Safety instructions MultiAlpha 6x32

300940 en - 03/11

1-2

1.2.

Safety principles

Attention ! Before handling the machine, each user is held
to read firste this instruction !

The user should read and understand this manual before handling and/or operat
ing the machine.

For any further information, please contact the manufacturer or your local repres
entative.

Attention ! Failure to follow these instructions may cause
serious accidents !

All machine users such as:

-

the owner;

-

servicemen, installation staff, maintenance staff or other related people;

-

user, operator, commissioner, programmer, operator, mechanic;

must under all circumstances read and strictly observe the following instructions.

These instructions also apply for the options, components, installations, devices
and systems relating to the machine.

1.3.

Significance of the safety instructions

All the safety and protection instructions provided in this manual must be
observed in order to avoid all reversible and irreversible personal injuries, material
damage or environmental pollution. Similarly, the legal regulations, accident pre
vention and environmental protection measures, as well as technical regulations
aimed at appropriate and risk-free work methods in force in the country and
place of use of the machine must be respected.

1.4.

Failure to observe the safety regulations

Failure to observe the safety and protection regulations, as well as the existing
legal and technical regulations could result in reversible or irreversible personal
injuries, material damage or environmental pollution.

Caution !

TORNOS SA

shall not be held liable if these instructions are not followed.

1.5.

Operating instructions and advice

The operating instructions and advice provided by the supplier with the machine
or after its delivery must be passed on to anyone handing and/or operating the
machine or responsible for it in any way.

These persons must read and strictly follow these instructions.

The instructions must be kept up-to-date and stored in a clean place. Anyone
likely to work on the machine should have access to the instructions.

«
...
12
13
14
15
16
...
»

Содержание MultiAlpha 6x32



























































































Отзывы:

Нет отзывов

Похожие инструкции для MultiAlpha 6x32

Бренд: Bartscher Страницы: 22

Бренд: Fein Страницы: 248

Бренд: ZF Страницы: 30

Бренд: Raymarine Страницы: 111

Бренд: Eagle Страницы: 3

Бренд: 1010music Страницы: 2

Бренд: 1010music Страницы: 4

Бренд: ParaBody Страницы: 3

Бренд: Hach Страницы: 52

Бренд: hager Страницы: 2

Бренд: NEILPRYDE Страницы: 55

Бренд: HANYOUNGNUX Страницы: 4

Бренд: Park House Healthcare Страницы: 6

Бренд: J&M Страницы: 33

Бренд: PAT Страницы: 44

Бренд: Park Tool Страницы: 4

Бренд: Qlight Страницы: 4

ST60+ SPEED INSTRUMENT

Бренд: Raymarine Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды