tornos MultiAlpha 6x32, Инструкции по безопасности

Страница: 59 / 90

Safety instructions MultiAlpha 6x32 - 5. Machine use
300940 en - 03/11 5-21
1
Select the "MDI" mode to
perform one or more
controls entered on the
keyboard.
MDI Automatic
Select automatic mode to
run the program.
Press the "CYCLE" key.
Keep the key "Cycle Feed" + or - pressed. Hold the keys “Cycle Feed” and “F2” down
simultaneously.
Return to the
CONTINUOUS CYCLE
4
Running the part program and spindle and
tool rotation are authorised.
- The NC axis movement speed is limited to 2
m/min.
- The rotation speed of the spindles and
turning tools is limited.
All other movements of equipment or
spraying of fluid is not authorised.
See the list of MDI controls authorised with the
doors open in the operating instructions.
Running the part program and spindle and
tool rotation are authorised.
- The NC axis movement speed is limited to 2
m/min.
- The rotation speed of the spindles and
turning tools is limited.
All other movements of equipment or spraying
of fluid is not authorised.
See the list of MDI controls authorised with the
doors open in the service instructions.
Automatic modes
+
or
Fig. 18