Tornado Floorkeeper 28 OB/99128OB Скачать руководство пользователя страница 2

2

10 Years*

Plastic water tanks and Rotationally-molded bodies

2 Years*

Parts on all Tornado cleaning equipment

1 Year*

Labor on all Tornado cleaning equipment

1 Year*

Warranty on batteries, one year prorated

All battery warranties are handled directly by the battery manufacturer, on a one year prorated basis

Long -Term Buyer Protection Limited Warranty

Tornado Industries, LLC. warrants to the end user/ customer that the Tornado product(s) will be free from 

defects in material and workmanship for the duration(s) described below.  This limited warranty DOES NOT 

cover machines and/or components subject to normal wear and tear, damage that occurs in shipping, 

failures resulting from modification, accident, unsuitable operating environment, misuse, abuse, 

neglect, 

or improper maintenance

.  For full details, contact your Authorized Tornado Distributor, Service Center, or 

the Tornado Technical Service Department.  Tornado sales and service representatives are not authorized to 

waive or alter the terms of this warranty, or to increase the obligations of Tornado under the warranty.

Terms subject to change without notice

1.  All Windshear™ Blowers, Storm, TV2SS, Side and Downdraft, Insulation Blowers, CV 30, CV 38, CK14/1 

PRO, CK 14/1 BSE, CK14/2 PRO, SWM 31/9, CK LW13/1, CK LW 13/1 ROAM, CV 38/48 Dual, PV6, PV10, PV6 

ROAM, Wall Mount Vacuum and all chargers are warranted for 1 (one) year for both parts and labor.

2.  All non-wear item parts purchased after warranty expiration are warranted for 90 days.

3.  Warranty starts from either: The date of sale to the consumer, or 6 months after the dealer purchased 

the unit from Tornado (at Tornado’s discretion), whichever comes first.

4.  The EB 30 is warranted for a period of 90 days for both parts and labor.

5.  Propane-powered equipment engines are limited to the engine manufacturer’s warranty.

6.  Ride-on Scrubbers are warranted for 24 months parts, and 6 months labor, or 1,000 hours, whichever 

occurs first.

Note:

 

Tornado, The Latest Dirt, Floorkeeper, Carpet-

keeper, Carpetrinser, Carpetrinser/Dryer, Headmaster, 

Taskforce, PAC-VAC, T-Lite, Glazer, Windshear, Max-Vac 

and Trot-Mop are trademarks of Tornado Industries

Website: www.tornadovac.com

Phone 1-800-VACUUMS

Fax 817-551-0719

Address 3101 Wichita Court

Fort Worth, TX 76140

Form F2662.©2019.  All rights reserved

1-800-VACUUMS  

 

Over 91 Years of Cleaning Innovation 

A Tacony Company

 

Содержание Floorkeeper 28 OB/99128OB


































Отзывы: