Tornado Floorkeeper 28 OB/99128OB, Руководство по эксплуатации и техническому обслуживанию

Страница: 10 / 33

10
The on-board charger has charging indication LEDs - the red LED means it has just started the charging
cycle, the yellow LED indicates that it has reached the second phase of charging and green LED means the
unit is fully charged.
Charging indication LEDs
Red indicates charge cycle has just begun
Yellow indicates charge cycle is in the second phase
Green indicates charge cycle is complete
After charging is complete, wrap the cord of your on-board charger securely to ensure the cord is not
damaged.
MACHINE PREPARATION
SETTING THE DIP SWITCHES ON YOUR ON-BOARD CHARGER FOR YOUR BATTERY TYPE
Use small screw driver to
lift label off charger
The on-board charger is able to charge wet, lead acid or maintenance-free AGM
batteries. As your unit leaves the factory, the charger is set up to match the type of
battery chosen in the original machine order. Should you choose to change from the
original battery type, the charger can be changed by re-setting the dip switches.
NOTE: The on-board charger has been programmed to work with the batteries that
Tornado provides. Using other battery types not specified for the unit by Tornado may
impair performance of the unit and will affect the life of the batteries.
To access the dip switches, use a small screw driver to lift the corner of the label on the
on-board charger and peel back partially to reveal them. Set the dip switches as shown
below for the specific battery type being used in your machine.
BATTERY TYPE NA104 TROJAN
260AH LEAD
ACID
DIP SWITCHES
Off
(L)
OFF
(L)
OFF
(L)
ON
(R)
BATTERY TYPE NA105 FULL RIVER
250AH AGM
DIP SWITCHES
Off
(L)
OFF
(L)
OFF
(L)
OFF
(L)