7
IMPORTANT SAFETY
INSTRUCTIONS
READ AND UNDERSTAND
ALL INSTRUCTIONS BEFORE
USING THIS UNIT
Read and understand this
owner’s manual and all labels
on the unit before operating.
Safety is a combination of
common sense,staying alert
and knowing how your unit
works. Use this unit only as
described in this manual.
Use only manufacturer’s
recommended attachments.
To reduce the risk of personal
injury or damage to your
unit use only Tornado
recommended accessories.
GENERAL RULES OF
SECURITY
The rules below have to be
followed carefully in order to
avoid damages to the operator
and to the machine.
- Read the labels carefully on
the machine. Do not cover
them for any reason and
replace them immediately if
damaged.
- The machine must be used
exclusively by authorized staff
that has been instructed for its
use.
- During the working of the
machine, pay attention to
other people and especially to
children.
- In case of danger act
immediately upon the
emergency brake.
- Leaving the machine in
parking position, take off the
key and act upon the parking
brake.
- Do not mix different
detergents, avoiding harmful
odors. - Signal the areas of
moist floors with suitable
signs.
Do not place any liquid
containers onto the machine.-
Storage temperature: between
-13°F and 131° F (25°C and
+55°C)..
- Perfect operating
temperature: between 32°F
and 104°F (0°C and 40°C).
- The humidity should be
between 30 and 95%.
- Do not use the machine in
explosive atmosphere.
- Do not use the machine as a
means of transport.
- Do not use acidic solutions in
such concentrations that could
damage the machine and/or
the persons.
- Do not use the machine
on surfaces covered with
inflammable liquids or dusts
(for example hydrocarbons,
ashes or soot).
- In case of fire, use a powder
fire-extinguisher.
Do not use water.
- Do not strike shelvings or
scaffoldings, where there is
danger of falling objects.
- Adapt the working speed to
the conditions.
- Do not use the machine on
areas having a higher gradient
than the one stated on the
number plate.
- The machine has to carry out
simultaneously the operations
of washing and drying.
Different operations must be
carried out in restricted areas
prohibited to non-authorized
personnel. Signal the areas
of moist floors with suitable
signs.
- If the machine does not work
properly, check by conducting
simple maintenance
procedures. Otherwise, ask
for technical advice to an
authorized assistance center.
- Where parts are required,
ask for ORIGINAL spare parts
to the distributor and/or to an
authorized dealer.
- Use only ORIGINAL brushes
indicated in the paragraph
RECOMMENDED BRUSHES .
- For any cleaning and/or
maintenance operation take
off the power supply from the
machine.
- Do not take off the
protections which require the
use of tools to be removed.
- Do not wash the machine
with direct water jets or with
high water pressure nor with
corrosive material.
- Every 200 working hours
have a machine check
through an authorized service
department.
- In order to avoid scales on
the solution tank filter, do not
fill the detergent solution many
hours before the machines’
use.
- Before using the machine,
check that all panels and
coverings are in their position
as indicated in this use and
maintenance catalogue.
- Be sure the recovery tank is
empty before lifting it.
- Restore all electrical
connections after any
maintenance operation.
- Provide for the scrapping of
the material of normal wear
following strictly the respective
rules.
- When your machine has to
stop activity, provide for the
appropriate waste disposal
of its materials, especially
oils, batteries and electronic
components, and considering
that the machine itself
has been, where possible,
constructed using recyclable
materials.
