background image

8

Symbol denoting the 
solution valve.
Indicates the solution 
valve lever. Indicates 
the signal lamp of 
the solenoid valve 
functioning.

Symbol denoting the 
brush.
Indicates the switch of 
the brush motor.

Symbol denoting the 
suction motor.
Indicates the switch of 
the suction motor.

Symbol denoting up – 
down of the squeegee.
Indicates the squeegee 
lever.

Symbol denoting the 
selection switch of the 
driving speed.

Symbol that indicates 
the lever for the brush 
base lifting or the push 
button up/down brush 
base.

Symbol denoting the 
charge level of the 
batteries.

Symbol denoting the 
hour meter.

Indication of the 
maximum temperature 
of the solution 
detergent.
It is placed near the 
charging hole of the 
solution tank.

Symbol denoting the 
signal lamp of the 
starting of the brushes
rotation.

Symbol denoting 
the push button to 
visualize on the display 
the brush pressure set.

Symbol denoting the 
functioning of the 
adjustment knob of the 
brush pressure.

Symbol denoting the 
push button and the 
signal lamp up/down 
of the squeegee.

Symbol denoting the 
crossed bin. Indicates 
that at the end of its 
activity, the machine 
has to be disposed 
conforming to the 
laws in force.

Symbol denoting the 
open book.
Indicates that the 
operator has to read 
the manual before the 
use of the machine.

Warning symbol.
Read carefully the 
sections marked 
with this symbol, for 
the security of both 
the operator and the 
machine.

Symbol denoting 
the functioning of 
the solution valve 
adjusting the flow of 
the detergent solution.

Symbol denoting the 
selection switch of the 
operation mode
manual/automatic.

Symbol denoting the 
push button and the 
signal lamp up/down
brushes.

Symbol denoting the 
push button and the 
signal lamp of the
break wash mode.

Symbol denoting the 
drive selector
forwards/backwards.

Содержание 99772
























Отзывы: