9
Technical Specification
DESCRIPTION
WIDTH
mm/in
725/28.5
WIDTH WITH SIDE BRUSH
mm/in
785/31.0
HEIGHT WITH HANDLE
mm/in
1020/40.14
HEIGHT WITHOUT HANDLE
mm/in
400/15.75
LENGTH WITH SIDE BRUSH
mm/in
1000/39.4
LENGTH WITHOUT SIDE BRUSH
mm/in
800/31.5
WEIGHT WITH SIDE BRUSH GROUP
kg/lbs
26/57.0
DIAMETER OF DRIVE WHEEL
mm/in
280/11.0
SWEEPING WIDTH WITHOUT SIDE BRUSH mm/in
460/18.0
SWEEPING WIDTH WITH SIDE BRUSH
mm/in
650/25.4
DIAMETER OF MAIN BRUSH
mm/in
230/9.0
MAIN BRUSH BRISTLE DIAMETER
mm/in
0.18/0.01
BRUSH SPEED (THEORETICAL)
rpm
273 at 4 [email protected] mph
SIDE BRUSH BRISTLE DIAMETER
mm/in
0.4/0.015
V-BELT (SIDE BRUSH)
mm/in
8 x 1680/0.31 x 66
HOPPER CAPACITY
Lit/Gal
40/9.0
DIRECTION OF ROTATION FOR SWEEPING
Forward
AREA COVERAGE
Up to 2600 sq. mtr/hr at 4 kph, 28,000
sqft/[email protected] mph
Maintenance Schedule
Maintenance
Compliance with the operating and maintenance instructions will ensure trouble free and smooth op
-
eration of the machine. If you are not capable of performing the actions according to the maintenance
schedule by yourself, please contact Tornado. When ordering spare parts, please quote the machine
No. indicated on the name plate. The nameplate is installed on the left side of the frame.
Maintenance Intervals
Daily
- empty hopper - clean the unit - check brushes and gaskets
Weekly
- remove the ropes, tapes etc entangled in the main brush shaft
Monthly
- grease the track wheels - check V-belt tension, if necessary, re-tighten
Trouble Shooting
TROUBLE
SOLUTION
Machine hard to push/pull
Decrease main brush pressure setting
Grease main Wheels
Sweeping unsatisfactory
Increase Main/Side Brush Pressure
Clean Main/Side Brush
Check Main Brush for loose bristles
Traces of dirt left behind the machine
Check side/rear rubber gaskets
Side Brush not rotating
Check V- Belt for tension
