8
TIEDOWN INSERT INSTALLATION
INSTRUCTIONS
On one end of each of your tie down inserts is a triangular plate referred to
by Torklift as a bullet plate. Your tie down inserts should be installed with the
shorter side of the bullet plate facing away from each other, i.e.. The shorter
side of the front insert should point to the front of the truck and the shorter
side of the rear insert should point towards the rear of the truck.
Once installed, attach the TorkLift directional stickers to the face of the
bullet plate on the insert as a reminder.
DRIVERS SIDE FRONT
DRIVERS SIDE REAR
IMPORTANT NOTE: Your tie down inserts are designed to have clearance inside of the
receiver. This is to account for road debris, as well as aid in installation and removal. Some
rattle may be expected if the inserts are left installed while not under load from the camper.
