泰智科技
Shenzhen Topwisdom Technology Co., Ltd
64
draw the figure in several sections instead of drawing it continuously, therefore, the
software will create multiple effects of output (this is relevant to the order of drawing of
different users), however, may be none of the effects is what you expect.
Please see the following sample for different effects of cutting.
Cutting 1 Cutting 2 Cutting 3
Cutting 4 Cutting 5
Fig. 4-37
As you can see in the drawings above, it totally takes 5 times to cut the entire drawing,
and the procedure is disordered. The effect is not expected, seeing from the stroking in
the drawings above, each Outline reaches the end and stops till there’s no connected
line section, but it is hard to choice the path in this way, and there’s also great
randomness, therefore, the entire drawing is divided into several parts. There’s little
software, currently, is provided with the capacity to manage the problems as a whole
like human being, for instance, cutting the external rectangle before the internal part
etc.. Therefore, we must pay attention to this kind of drawing when drawing, e.g., if you
want to cut the two rectangles along the 4 sides, you must combine the separate line
sections of the rectangles together with software, thus the disordered engraving will be
avoided and a relatively neat path will be achieved. Many users just patch up the
drawings Outline by Outline in irregular order, therefore, multiple types of stroking will
be created for a drawing as shown in Fig.4-34, which is actually very simple, while in
fact, there are many drawings much more complicated than this one, one joint may be
connected with many line sections, and the stroking will be more disordered, so it’s
hard to arrange the order effectively by our software alone, and you must solve the
problem from the beginning, the method of drawing.
Disordered output for single lines without joint or crossing
Fig. 4-38
Fig. 4-38 seems to the same to Fig. 4-34 at first view; however, the engraving is
disordered, why? Let’s amplify the drawing and you can see that there’s no joint
Содержание TL-403
Страница 14: ...Shenzhen Topwisdom Technology Co Ltd 8 Fig 2 5...
Страница 36: ...Shenzhen Topwisdom Technology Co Ltd 30 Fig 3 21 Double click the System show as Fig 3 22 Fig 3 22...
Страница 37: ...Shenzhen Topwisdom Technology Co Ltd 31 Fig 3 23 Click the device management Fig 3 24 The assigned COM port...
Страница 41: ...Shenzhen Topwisdom Technology Co Ltd 35 Fig 3 30 Double click TCP IP setting Fig 3 31...
