MT05S GPS Motorcycle/Vehicle Tracker
User Manual
Page 6
It is used to restore the car to normal status after being stopped.
Check the Real Physical Address
SMS command:
111111ADD
(or
111111add
)
User can program the tracker to work with our platform. Once connected, user can
send this SMS command to get the actual address which is translated by the platform..
Remark: (1) The GPRS data service of the tracker’s SIM card must be activated, and
the correct GPRS setting is needed (refer to the chapter of the setting of GPRS
connection); (2) The physical address depends on the map of the platform..
Change User Password
SMS command:
111111PSWnnnnnn
(or
111111pswnnnnnn
)
This instruction is used to change the user password. The length of the
user’s password is 3~6 digits. Users are suggested to change to the new
password in use.
Example: User sends the SMS “111111PSW12345” to the system SIM card
number, and gets the confirmed SMS “111111PSW12345” in 3 seconds. It
means that the user password has been changed to 12345.
Remark: Please keep the password deep in mind if it is changed.
Odometer
SMS command:
111111ODO:
It is used to read the present odometer
SMS command:
111111ODO:X
It is used to set the basic value of odometer
Over-speed Alert
111111SPD:X
x is the speed in KM/H , maximum value is 255KM/H
(For example: 111111SPD:120, if the car speed is over 120KM/H, it will
send alert SMS to warn you).
111111SPD:0
to disable the over-speed alert. It is the default setting.