MT05S GPS Motorcycle/Vehicle Tracker
User Manual
Page14
Installation Steps:
(1) Please read the manual carefully before installation. Please prepare a valid
GSM SIM card with Caller ID Display & GPRS function;
(2) Please use screw driver to open the cover of the box;
(3) Insert the valid GSM SIM card, then turn on the backup battery switch;
(4) Close the cover, and fix the main unit tightly with the wiring harness at the
correct place, please make sure that the side with GPS antenna(with
satellite icon) is placed upside to sky or away from the metal materials,
please make sure to install the main unit at broad place so that it can
receive GPS signal well. For motorcycle, it is better to install inside the head
bulb light where there is power supply and water proof. For vehicle, it is
better to install inside the upper rim of the driving room or inside the
dashboard. The recommend installation place is showed in the following
picture:
(5) Do the wring connection according to the diagram;
(6) Call the SIM card, to check if rings, if not, then check the power supply and
the change the place of installation;
(7) If it rings when calling the SIM card, then send SMS to the tracker to check
the GPS coordinate, if the GPS location is not correct, then fix the main unit
to other place so that it can receive better GPS signal.
(8) IMPORTANT: The side with GPS antenna(satellite icon) must be placed
upside to the sky and kept away from the metal materials, otherwise, it can’t
get GPS signal well.
VII. FAQs & Troubleshooting
FAQ
Troubleshooting
I call the tracker, it does not ring
(1) The GSM SIM card has no credit;
(2) The SIM card is protected by PIN code;
(3) Check the power supply, if 2 LEDs flash;
(4) The SIM card is placed correctly in the slot;
I call the tracker, it rings, but it
doesn’t response with SMS
(1)The user password is wrong, please use the
correct password or reset the password to test;
(2) Low power, please use outside power supply to
power on the unit to test
I can not get the alarm message
(1) The SIM card inside the device has no credit;
(2) The Alert-received mobile number is not
programmed correctly, or the SMS command is not