MT05S GPS Motorcycle/Vehicle Tracker
User Manual
Page 9
Routine Optimization
******DEG:X
111111DEG:30
It is to set the angle. When the car turns a corner over this angle, then it will sample a location
to optimize the routine.
Check Vehicle battery
******ADC:X
111111ADC:
It will reply the voltage of external power battery.
Adjust harsh brake &
acceleration threshold
******USP:X
******DSP:X
111111USP:30
111111DSP:70
X: is the speed(km/h), value range: 0~100 Km/h
If the change of car speed is larger than X between 2 seconds, it will be triggered as harsh
brake or harsh acceleration.
******USP:X
: to set the threshold of harsh acceleration
******DSP:X
: to set the threshold of harsh brake
Set Heartbeat interval
******HRT:X
111111HRT:5
It is to set the time interval of the tracker's heartbeat packet, default: 3minute. Maximum:
65535 minutes.
Clear Data Logger
******NUL
111111NUL
It is to clear the offline GPS data in the data logger
Check the Gprs Setting
******WWW:
111111WWW:
It is to check the GPRS settings.
Set the threshold of
smart engine detection
******ACC:X
111111ACC:13.0
The default setting is 13.0. For big truck, it is suggested to set as 26.0. User can send
111111ADC to check the real value. the last number in the feedback SMS is vehicle's voltage.
Check firmware version
& IMEI, others
111111PAR
111111PAR
It is to check the firmware version, IMEI, device ID GPRS settings, time zone.