TOPSCCC EX-93821, Руководство пользователя

Страница: 42 / 123

EX-93821/EX-93823 Flat Panel PC
Page 42
3.7 Jumper Settings
NOTE:
A jumper is a metal bridge that is used to
close an electrical circuit. It consists of
two metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them.
To CLOSE/SHORT a jumper means
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper
means removing the plastic clip from a
jumper.
The EXMB-LX-800 motherboard has several onboard jumpers (
Table 3-3
).
Description Label Type
AT/ATX power select CN25 2-pin header
COM3 pin-9 signal select JP3 6-pin header
COM1 and COM2 pin-9 signal select JP4 10-pin header
COM2 port select (pin-12 signal select) JP5 12-pin header
COM2 port select (pin-3 signal select) JP6 3-pin header
Table 3-3: Jumpers
3.7.1 AT/ATX Power Select
Jumper Label: CN25
Jumper Type:
2-pin header
Jumper Settings:
See
Table 3-4
Jumper