TOPP K200, Инструкция по установке и эксплуатации

Страница: 53 / 56

IT 7
53
EN
K200
INSTRUCTIONS FOR INSTALLATION AND USE
The undersigned, in the name of and behalf of
Topp S.r.l.
Via Galvani, 59
36066 Sandrigo (VI)
herewith declares that the person authorised to compile the technical file is
Name:
Plaza Trinidad - Topp S.r.l.
Address: via Galvani,59 36066 Sandrigo (VI)
and that to the partly completed machinery
the following company
pedestrial DOORS WITH ONE, TWO AND FOUR LEAFS with radio control unit
Type: K
Variants: K140-K140E- K200-K200E-K280-K280E-K200T-K280T-DUEVILLE
the following essential requisites of the
Italia
2006/42/EC Machinery Directive (including all applicable amendments)
have been applied and fulfilled, in terms of their applicability, only for the above-described partly completed machinery:
ELECTROMECHANICAL AUTOMATION FOR LINEAR SLIDING
Date: 31/10/2018 Signature: Sandrigo, Matteo Cavalcante
This declaration of conformity is issued under the sole responsibility of the manufacturer.
EN 60335-2-103:2015 (applicable parts)
EN 16005:2012 (applicable parts)
Enclosure I: 1.1.2 a)-b)-c)-e), 1.1.3, 1.1.5, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6,
1.5.8, 1.5.10, 1.5.11, 1.5.13, 1.6.1, 1.6.2, 1.6.3, 1.7.3, 1.7.4;
The following harmonised standards have been applied:
that the relevant technical documentation is compiled in accordance with part B of Annex VII of the above mentioned
Machinery Directive.
The above identified partly completed machinery must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of the above mentioned Machinery Directive.
The undersigned also undertakes the obligation, in response to a duly reasoned request by the national market surveillance
authorities, to transmit to the a.m. authorities, in electronic or paper format, the relevant technical documentation on the
partly completed machinery.
Administrator ....................................................................
ORIGINAL
Topp S.r.l.
Variants: K140-K140E- K200-K200E-K280-K280E-K200T-K280T-DUEVILLE
EN 301 489-3 V1.6.1
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Date: 31/10/2018 Signature: Sandrigo, Matteo Cavalcante
EN 61000-6-3:2007 + A1:2011 + AC:2012
the following company
36066 Sandrigo (VI)
ELECTROMECHANICAL AUTOMATION FOR LINEAR SLIDING
EN 300 220-2 V3.1.1
pedestrial DOORS WITH ONE, TWO AND FOUR LEAFS with radio control unit
is in compliance with the following directives (including all applicable amendments):
RED Directive 2014/53/EU
EN 62233:2008
Italia
Type: K
and the following technical documents:
The undersigned, in the name of and behalf of
Via Galvani, 59
herewith declares that the product
RoHS II Directive 2011/65/EU
EN 50581:2012
and that the following harmonised standards have been applied:
EN 61000-6-2:2005
...................................................................... Administrator
ORIGINAL
EU DECLARATION OF CONFORMITY
EC DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY