TOPP C40S, Оригинальное руководство пользователя

Страница: 10 / 36

3.5- DESTINATION OF USE
THE ACTUATOR HAS BEEN DESIGNED AND MANUFACTURED TO PERFORM
AUTOMATICALLY, BY MEANS OF A CONTROL DEVICE, THE OPENING AND CLOSING OF
TOP HUNG WINDOWS, BOTTOM HUNG WINDOWS, PIVOT WINDOWS, AND SKYLIGHTS.
The C40S Chain actuator is equipped with the latest TOPP system for the coordinated
synchronization of the chain movement. The electronic speed control is fully automatic and
requires no external control unit; just connect the yellow/white/blue cables as per wiring diagram at
the back of the manual to achieve the synchronized mode.
The Smart Reset System (SAI) has
also been included which adjusts the closure of the window in an optimum manner.
The C40S chain actuator is mounted when you need two or more attachment points because the
window is particularly heavy or wide and only one actuator would not allow perfect closure of the
window. It should be remembered that the force exerted by the actuators individually is the same
as a similar
C40 actuator; for example, by mounting two actuators the force applied to the window
is, therefore, doubled. The window is moved in a uniform, synchronized and coordinated manner
with no interruptions and/or speed changes in the actuators' operation. In the event of any failure of
one of the actuators due to a mechanical or electrical fault, the others also stop operating,
guaranteeing that the window remains intact.
3.4- FORMULAS FOR THE CALCULATION OF THRUST AND TRACTIVE
FORCE
Top hung windows (A) or
bottom hung windows (B)
F = Force necessary for opening or
(N)
closing
P = Weight of the window
(N)
(only movable part)
C = Window opening stroke
(mm)
H = Window height
(mm)
F = (0,54 x P) x ( )
C
H
P
F
H
C
B
P
F
H
C
A
F
P
Horizontal domes or skylights
F = Force necessary for opening or
(N)
closing
P = Weight of the skylight or dome
(N)
(Only movable part)
F = 0,54 x P
10
C40S 3- TECHNICAL DESCRIPTION
INSTALLATION AND USE ISTRUCTIONS
Fig. 2
Fig. 3