TOPP C40S, Оригинальное руководство пользователя

Страница: 18 / 36

18
C40S 5- INSTALLATION
INSTALLATION AND USE ISTRUCTIONS
5.2- TOP HUNG WINDOWS
(Fig. 7 and Fig. 13 ÷ 20)
1) Open the package (par. 3.7) and extract the
various components;
2) Fig. 13- With a pencil draw the centre line “X” of the
window frame;
3) Fig. 14- Apply the template (POS.2) on the window
frame aligning it with the previously drawn centre
line “X”;
CAUTION: FOR NON-COPLANAR WINDOW FRAMES,
I T I S N E C E S S A RY TO C U T T H E T E M P L AT E
CONCERNED PART AND TO APPLY IT ON THE
WINDOW FRAME PAYING ATTENTION TO KEEP IT IN
THE SAME REFERENCE POSITION.
4) Fig. 15- With a suitable drill, create on the window frame holes having the related
diameter, given on the template;
5) Fig. 16/17- With the suitable screws tighten the bracket for window frame connection
and the quick coupling;
6) Fig. 18- With an Allen wrench, adjust the opening stroke by means of a proper
selector (Ref. 1) (for tandem installations, the actuators must have the same stroke).
CAUTION: VERIFY THAT THE SELECTED STROKE IS SOME CENTIMETRES LOWER THAN
THE STROKE EFFECTIVELY ALLOWED BY MECHANICAL LOCKS, COMPASS LIMIT
DEVICES OR WING OPENING HINDRANCES.
7) Hook the system up electrically as indicated in par. 5.4 and the wiring diagram (for
tandem installations, complete the hookup per the wiring diagram before running the
chain out). Run the chain out for at least 10 cm, then disconnect the actuator from its
power supply.
VERIFY THAT THE CHAIN ADJUSTMENT END (FIG.8 - Ref. A) IS ON THE SAME AXIS OF
THE QUICK COUPLING (FIG.8 - Ref. B). OTHERWISE, REPEAT THE OPERATIONS AND
POSITION CORRECTLY; WHEN THEY ARE NOT COAXIAL, THIS MAY DAMAGE THE
ACTUATOR AND THE WINDOW FRAME (FIG. 8).
Fig. 7
YES
A A B B
NO
Fig. 8