TOPP C30, Инструкция по установке и эксплуатации

Страница: 22 / 32

22
C30
6.1- USE OF THE ACTUATOR
THE ACTUATOR CAN BE USED ONLY BY A USER ACTING IN COMPLIANCE WITH THE
INSTRUCTIONS GIVEN IN THIS MANUAL AND/OR IN THE MANUAL OF THE ACTUATOR
COMMAND DEVICE (e.g.: WIND AND RAIN CONTROL UNIT).
BEFORE USING THE ACTUATOR, IT IS COMPULSORY FOR THE USER TO READ AND
UNDERSTAND IN ALL ITS PARTS THIS MANUAL, AS WELL AS THE EVENTUAL MANUAL
OF THE INSTALLED CONTROL DEVICE TYPE.
BEFORE OPERATING THE ACTUATOR, THE USER MUST COMPULSORILY VERIFY THAT
NEAR AND/OR UNDER THE WINDOW THERE ARE NOT ANY PERSON, ANIMAL AND
THING WHOSE SAFETY MAY BE ACCIDENTALLY JEOPARDISED (SEE PAR. 4.2).
DURING THE OPERATION OF THE ACTUATOR CONTROL DEVICE, THE USER HAS TO
COMPULSORILY OCCUPY A CONTROL POSITION ASSURING VISUAL CONTROL ON THE
WINDOW MOVEMENT.
THE FUNCTION EFFICIENCY AND THE RATED PERFORMANCE OF THE ACTUATOR, OF
THE WINDOW FRAME ON WHICH IT IS INSTALLED AND OF THE ELECTRIC EQUIPMENT
MUST BE VERIFIED STEADILY IN TIME BY PERFORMING, WHEN NECESSARY,
INTERVENTIONS OF ROUTINE AND SUPPLEMENTARY MAINTENANCE ASSURING THE
OPERATION CONDITIONS IN COMPLIANCE WITH THE SAFETY REGULATIONS.
ALL ABOVE MENTIONED MAINTENANCE INTERVENTIONS MAY BE PERFORMED
EXCLUSIVELY BY TECHNICAL COMPETENT AND QUALIFIED TECHNICAL PERSONNEL
SATISFYING THE TECHNICAL AND PROFESSIONAL REQUIREMENTS FORESEEN BY
THE LAW IN FORCE IN THE COUNTRY OF INSTALLATION.
The use of the actuator allows to control automatically the opening and closing of
the window according to the type of control device installed
(see par. 5.5) .
6- USE AND OPERATION
INSTALLATION AND USE ISTRUCTIONS
VER.1.0
REV.07.04