TOPP C130 Series Скачать руководство пользователя страница 23

Страница: 23 / 56

5.8

EMERGENCY PROCEDURES

regulations  of  the  country  in  which  it  will  be  used.
Depending  on  the  various  types  of  installations,  the
actuators  may  be  operated  by  the  following  control
devices:

Manual push button (C130/230V and C130/24V):

Selector switch button with two poles and central off
position, fitted with "dead man's switch” control

;

Optional- Control and supply unit (C130/230V and
C130/24V):

Power stations with microprocessor that

control the single actuator or more actuators
simultaneously with one or more manual buttons, an
infrared ray remote control or a 433 MHz radio control.
Rain sensors can be connected to these power
stations, a wind sensor and a brightness sensor;

Any power stations used, will have to supply
voltage to the C130 for a maximum time of 120
seconds.

For model

C130/RR

see chapter

If the window must be opened manually due to lack of

electricity or because the mechanism locks, follow the
instructions below:

Top hung opening:

Fig. 42-

Insert a screw driver in

the right side opening (Ref. 1) as shown in figure,
disconnect the chain end from the ARS coupling and
extract the actuator;

Bottom hung window opening:

Fig. 43 -

Put a cut

screwdriver between the bottom hung window
bracket and the chain terminal and lift up until the
chain terminal is disengaged.

Should it be impossible to perform the above mentioned
procedures, disconnect the clamps from the window
frame connection brackets.

Before performing any type of intervention on the
actuator and on the window the following must be done:

disconnect the branching device from the power
supply network;

to avoid unexpected start-ups, lock the branching
device's main switch that is installed on the power
supply line; if the main switch cannot be locked, a “do
not operate” warning sign must be affixed.

6.1

USE OF THE ACTUATOR

USE AND OPERATION

The  actuator  must  be  exclusively  used  by  a
person  who  can  act  in  compliance  with  the
instructions stated on this manual and/or on the
manual  for  the  actuator  control  devices  (power-
supply unit and control unit). .

The use of the actuator can automatically control the

opening and closing of the window depending on the
type of control device that is installed (see

par. 5.7

Before running the actuator, the user must make sure

that near or beneath the windows there are no persons,
animals or things whose safety can be accidentally
compromised (see

par. 4.4

While activating the actuator's control device, the

user must be in a secure control position that can ensure
a visual control of the moving window.

The user must constantly check the function

efficiency and the nominal performance of the actuator, of
the window wherein is installed and of the electrical
system; whenever necessary the user must perform

ordinary or extraordinary maintenance that can ensure
operation conditions comply with safety standards.

All of the interventions described above must be

carried out exclusively by competent and qualified
technical personnel with the professional technical
requirements provided by current laws in the country in
which the actuator is installed.

Do not operate dome windows in the presence of a

load of snow in excess of the quantity declared
acceptable by the window manufacturer.

In order for the automation unit to operate

correctly, we recommend carrying out periodical
maintenance on it, as indicated in par. 7.1 of this
manual.

TOPP informs the user that, in accordance with

art.  8  of  Ministerial  Decree  no.  38  of  22.1.2008,  the
owner  of  the  system  is  responsible  for  adopting  all
necessary  measures  to  maintain  the  safety  features
set  out  in  applicable  legislation,  observing  the
instructions for maintenance and use provided by the
manufacturer of the device and by the company that
carried out the installation.

C130/RR OPERATION

7.1

OPERATING PRINCIPLE

The C130/RR actuator is equipped with a control unit
type RR on the inside, which serves to control the
actuator manually using the radio control unit mod. TR8
TOPP (the programming and use of which are described

in para. 7.4 and 7.5) or automatically via the two rain
sensors installed on it.

It should be noted that the rain sensors should only
be installed on actuators for top-hinged or dome
windows.

INSTALLATION AND USE INSTRUCTIONS

C130