Topp Music Gear MX.10 USB V2, Руководство пользователя

Страница: 9 / 20

CONTROL ELEMENTS
18- CTRL ROOM/PHONES Control (PHONES control on the MX.5 V2)
This control is used to adjust the signal level going to the CONTROL ROOM/PHONES outputs. And
it won't affect the Main Mix output.
19- MASTER AUX SEND Control (except MX.5 V2)
This knob is used to determine the master AUX SEND levels. The adjustable range is from - to
+15 dB. When the external effect unit connected to mixer has no input gain control, you can get
a f15 dB gain available from these AUX SEND outputs.
20- POWER LED
21- PHANTOM 48V Switch and LED(+18V on MX.5 V2)
This LED lights up when the power switch is turned on.
This +48 VDC Phantom Power switch only apply to the XLR
microphone inputs. Never connect microphones when the
phantom power is on already. The LED near to this switch will
light up when the phantom power is switched on.
: Turn down all output levels before operating this switch
to avoid the possibility of "pop" in your speakers. Do not use
phantom power with tube or ribbon microphones, as this may
cause damage.
NOTE
22- METERS
This stereo LED meter will indicate the level of the overall
output signal.
23- MAIN MIX
This control sets the level of main mix signals sent to the Main
Outputs, Tape Outputs, CONTROL
PHONES, and LED
Display. On the MX.5 V2 and MX.6/USB V2, this is a rotary control; on
MX.10 and MX.12 , this is a fader.
When connecting a speaker to the speaker output jacks,
please pay more attention to the level setting for avoiding
damaging the speaker. Generally speaking, the faders will be
positioned between 0 dB and the +5 dB.
Note:
ROOM,
the /USB V2 /USB V2
22
23
24- MAIN OUT
These 1/4" TRS jacks represent the end of the mixer chain, where
your fully mixed stereo signal enters the real world. Connect
these outputs to the inputs of your amplifiers, powered speakers,
or serial effects processor (graphic equalizer, for example).
24
25
25- CTRL ROOM OUT
These 1/4" TRS are used to assign the control room signal to
the studio monitor speakers. They can also be used to provide
another main mix output, or to monitor the CD/TAPE Inputs (when engage the TAPE TO CTRL
RM/PHONES switch), or to monitor the aux send signal(MX.10/USB V2,MX.12/USB V2 only with FX
TO CTRL ROOM switch is engaged)
9
5