background image

 

could result in serious injury or death. This signal word is to be limited to 
the most extreme situations typically for machine components that, for 
functional purposes, cannot be guarded. 

WARNI NG:

 Indicates a potentially hazardous situation that, if not 

avoided, could result in serious injury or death, and includes hazards that 
are exposed when guards are removed. It may also be used to alert against 
unsafe practices. 

CAUTION: 

Indicates a potentially hazardous situation that, if not avoided, 

may result in minor or moderate injury. It may also be used to alert against 
unsafe practice. 
 

EQUIPMENT SAFETY GUIDELINES

 

l

 

Safety of the operator and by standards is one of the main concerns in 
designing and developing a digger. However, every year accidents 
occur which could have been avoided by a few seconds of thought and 
a more careful approach to handling equipment. You, the operator, 
can avoid many accidents by observing the following precautions and 
insist those working with you, or for you, follow them. 

l

 

In order to provide a better view, certain photographs or illustrations 
in this manual may show an assembly with a safety shield removed. 
However, equipment should never be operated in this condition. Keep 
all shields in place. If shield removal becomes necessary for repairs, 
replace the shield prior to use. 

l

 

Replace any safety sign that is not readable or is missing. Copies of 
such safety signs is shown in this manual. 

l

 

Never use alcoholic beverages or drugs that can hinder alertness or 
coordination while operating this equipment. Consult your doctor 
about operating this machine while taking prescription medications . 

l

 

Under no circumstances should children under the age of 18 be 
allowed to work with this equipment. Do not allow persons to 
operate or assemble this unit until they have read this manual and 
have developed a thorough understanding of the safety 
precautions and of how it works.

 Review the safely instructions 

with all uses annually. 

l

 

This equipment is dangerous to children and persons unfamiliar with 
its operation. The operator should be a responsible, properly trained 
and physically able person familiar with farm machinery and trained 
in this equipment’s operations. If the elderly are assisting with farm 
work, their physical limitations need to be recognized and 
accommodated. 

l

 

Use a tractor equipped with a Roll Over Protective System and seat 
bells. (ROPS) 

l

 

Never exceed the limits of a piece of machinery. If its ability to do a 

Содержание PHD50














Отзывы: