TOPMAQ MM3156, Руководство по эксплуатации для владельца

Страница: 11 / 32

１０
Figure 3
ASSEMBLY
After unpacking your WDS
( Wide Drum Sander ) and checking the Loose Parts
List for missing components, you are ready to assemble and install the Height
Adjustment Handle Assembly.
1. Screw the Height Adjustment Handle into the threaded nut in the Height
Adjustment Crank using a slotted screwdriver until snug. (See Figure 4.)
Figure 4
2. Locate the 4 mm set screw threaded into the side of the Height Adjustment
Crank. Position the Height Adjustment Crank over the Height Adjustment
Shaft with the
setscrew aligned with the machined flat area on the Height
Adjustment Shaft. (See Figure 5.)
6 mm Hex Wrench 4 mm Hex Wrech 10/12 mm Open End Wrench
Height Adjustment Handle Height Adjustment Crank
Height Adjustment
Handle
Height Adjustment
Crank
Threaded Nut