Walk-Behind String Trimmer Mower
8
GB
1.
1.
2.
2.
3.
ASSEMBLY
WHEELS
Remove the nut from wheel shaft.
Slide the wheel on the wheel shaft - the
wheel spacer already installed into the
wheel at factory.
Tighten the nut to secure the wheel in
place.
Remove the 4 groups of M5x10 screws and
flat washers from the cover and set aside
for later.
Align the holes in the flexible shield with
the holes in the chassis cover, secure the
assembly with the M5x10 screws and flat
washers in four places.
FLEXIBLE SHIELD
This walk-behind string trimmer mower
was partially assembled at the factory. To
assemble your machine follow the below
instructions.
UPPER HANDLE
1.
2.
3.
Loosen both of the handle adjustment
knobs enough and pivot the upper handle
backward to the desired position.
Stand in the operator's position behind the
trimmer to make sure handle is adjusted to
a comfortable position.
Tighten the handle adjustment knobs
securely.
