5.12 SYSTEM SETUP MENU
The is a screen shot of the
SYSTEM SETUP MENU
. This menu is for setting up any
additional options and restoring defaults to the digital recorder. In the
SYSTEM SETUP
MENU
the following fields are defined as follows
:
Note: The signal type is detected by the camera 1, so camera 1 input has to be
connected.
(1) LOAD SYSTEM DEFAULT:
YES:
Select
YES
to load system default.
NO:
Select
NO
to do nothing.
System will ask you to stop recording if you confirm to load when system is recording.
Note:
After loading system Default, the settings in
TIME/DATE
and
NETWORK SETUP MENU
will not be recovered to factory default’s.
(2) UPDATE SYSTEM SOFTWARE:
YES:
Select
(USB)
to update system software.
NO:
Select
NO
to do nothing.
System will ask you to stop recording if you confirm to update when system is recording.
(3) CALL MON QUAD SEQ:
The retention period of the call monitor quad display in the
sequence mode.
Note:
Please refer to
CALL
setting on page for an advanced call monitor setting.
(4) LANGUAGE:
System can be set in different languages.
Note:
The availablify of diffevent languages can be discussed upon customer’s request.
(5) QUICK PLAY:
Set up the start play time of the normal play mode.
TIME:
Quick play time, from 00:00 to 59:59. The default value is 10 minutes.
ON:
Enable quick play. The video played time is the immediate play time from now.
OFF:
Disable quick play. Videos will start to be played from the end point of the last play.
Note:
The recommendatory quick play time is 10 minutes. The video cannot be played due to
the video file is not stored to HDD yet if you set a quick play time too short.
41
Содержание TP-S1016MDR
Страница 1: ...INSTRUCTION MANUAL TP S1016MDR Digital Video Recorder...
Страница 63: ...59...
Страница 72: ...APPENDIX Remote Control 68...
