Topica TP-S1016MDR, Инструкция по эксплуатации

Страница: 12 / 78

Front Panel Keypads
In the screen display setting menu, we define:
(1) CAMERA: The display setting of the current camera.
(2) BRIGHTNESS: The bright percentage of the current camera; from 0% to 100%.
(3) CONTRAST: The contrast percentage of the current camera; from 0% to 100%.
(4) COLOR: The color percentage of the current camera; from 0% to 100%.
The selected item will show in red color bar. Use Jog to increase or decrease the value. Press ENTER to
confirm the setting value and move to next item. After finished setting, press SELECT or MENU key to
save and exit the dialog. Total of 8 channels are adjustable.
Display: Press this key to switch ON/OFF for camera title, date/time and HDD status.
Hold this key longer than 2 seconds for displaying the event log list.
9
10
USB Slot: Insert a USB for archiving video.
Hard Disk Trays: 2 x Hard Disk holder one for 3.5”hot-swapable HDD.another for
built-in HDD
11
12 HDD locks: Turn on HDD power and protection from taking out the HDD without authority.
13
REC: Press this key to start recording.
14
STOP: Press this key to stop recording or playing back.
15
PLAY: Press this key to stat playing back recoded picture (Please refer to page 44 for details).
16 PAUSE: Press this key to pause the playback picture.
17
SEARCH: Press this key to enter the Search Menu (Please refer page 46~47 for details).
18
COPY: Under PAUSE or PLAYBACK , Press this key to start copying still picture or video
stream into (Please refer page 48~49 for details).
19
ENTER : Press this key to enter sub-menu or confirm setup. When there is Alarm, Motion
or Video Loss occurs, press this key for alarm reset. The Event Log Dialog will show on
the display, then follow the instruction to continue.
20
LEDs: LEDs for HDD1, HDD2 , ALARM and LAN access (from left to right).
21
IR Remote Controller receiver
22
LCD Panel : To display Date/Time, Recording/Playback and HDD status.
8