5.11.4 HDD FULL
In
HDD FULL
, we define:
(1)
BUZZER:
HDD FULL buzzer.
ENABLE:
To enable a buzzer when HDD is full.
DISABLE:
To disable HDD FULL buzzer.
(2)
ALARM OUTPUT:
This will transmit a signal to another device. The setting of alarms are
NONE = not
activated, 1 = output signal 1 transmitted, 2 = output signal 2 transmitted, 3 =
output signal 3 transmitted and 4 = output signal 4 transmitted.
To change this,
simply use the Jog Dial on the DVR. Press the Enter key to make your selection.
(3) ALARM
DURATION:
Buzzer noise and event record duration of an alarm, from 1 sec
to 99 seconds. The default value is 5 seconds.
(4) NETWORK
ALARM:
YES:
To enable network alarm.
NO:
To disable network alarm.
(5) SEND
EMAIL:
YES:
Send an email when HDD is full.
NO:
Do not send an email when HDD is full.
The email address can be set in the
NETWORK SETUP MENU
.
40
Содержание TP-S1016MDR
Страница 1: ...INSTRUCTION MANUAL TP S1016MDR Digital Video Recorder...
Страница 63: ...59...
Страница 72: ...APPENDIX Remote Control 68...
