Topdon PulseQ AC Home US Version Скачать руководство пользователя страница 38

Страница: 38 / 40

The device is damaged and needs to be returned to the

factory for repair.

The sensor is damaged and needs to be returned to the

factory for repair.

Charger is not grounded; input power socket and input

plug need to be checked.

2×slow, 3×fast

2×slow, 4×fast

2×slow, 5×fast

Fault code 23:

Relay sticking

Fault code 24:

CCID sensor fault

Fault code 25:

Ground fault

Section 9—Warranty

TOPDON's Limited Warranty

TOPDON warrants to its original purchaser that the company's products will be free from defects in material and

workmanship for 36 months (charging station) and 12 months (charging cable) from the date of purchase

(Warranty Period).

For the defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or

product according to its technical support analysis and confirmation.

TOPDON shall not be liable for any incidental or consequential damages arising from the device's use, misuse, or

mounting.

Some states do not allow limitation on how long an implied warranty lasts, so the above limitations may not

apply to you.

This limited warranty is void under the following conditions:

• Misused, disassembled, altered or repaired by unauthorized stores or technicians.

• Careless handling and operation's violation.

Notice: All information in this manual is based on the latest information available at the time of publication and

no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any

time without notice.

Содержание PulseQ AC Home US Version









































Результаты поиска

Содержание PulseQ AC Home US Version

Отзывы:

Бренды по названию

Популярные бренды

Topdon PulseQ AC Home US Version, Руководство пользователя

Результаты поиска

Содержание PulseQ AC Home US Version

Отзывы:

Бренды по названию

Популярные бренды