background image

5

1.2.1 Safety signs used

The following warning signs, mandatory signs and information signs are used in this manual, on and in the AC EV 

Charger.

CAUTION: Warning of electrical hazards. 

This sign is intended to alert the user that severe personal injury or substantial property damage can 

result if the device is not operated as requested.

ATTENTION: Warning of a dangerous spot or dangerous situation. 

This sign is intended to alert the user that minor personal injury or material damage can result if the 

device is not operated as requested.

CAUTION: Do not touch in case of ESD. 

Indicates possible consequences of touching electrostatically sensitive components.

No access for unauthorized persons.

Use protective footwear.

Must wear a safety helmet.

Indicates important texts, notes, or tips.

1.2 SAFETY NOTES

Safety protection must be worn when installing the EV Charger.

Installation must be performed carefully due to risk of electric shock.

Must be installed vertically to allow for ventilation. Do not install in areas of vibration or risk of impact.

Install in noncombustible areas due to risk of fire.

Do not drop any foreign objects, especially metal objects, inside the Charger due to risk of fire.

The lead nose of the Charger must be securely attached due to risk of damage.

1.2.2 Safety Precautions for Installation

Содержание PulseQ AC Home US Version









































Отзывы: