manualshive.com logo in svg

Topdon PulseQ AC Home US Version, Руководство пользователя

Поделиться
Скачать
Topdon PulseQ AC Home US Version Скачать руководство пользователя страница 19

5.4 Wall Bracket Installation

Ensure the homeowner has chosen an installation location that allows the charging cable to reach the car's 

charging port while still providing slack. Ensure there is a stud available at the desired location for mounting 

the charging station. (See Fig. 5.4.1) Ensure there is WiFi signal available.

For plug-in installation, the NEMA outlet should be located 500-660 mm (20-26 in) from the ground adjacent to 

the stud where the charging station will be mounted. (See Fig. 5.4.2)

Refer to the Fig. 5.4.3 to understand the dimensions of the wall bracket. Please make sure the space on the wall 

is at least 5.62" × 5.98" (143mm × 152mm).

Fig. 5.4.1

Fig. 5.4.2

Fig. 5.4.3

1. 

2. 

1. 

WARNING: 

In areas with frequent thunderstorms, add surge protection at the service panel for all 

circuits. Ensure all power and ground connections, especially those at the breaker and bus bar, are 

clean and tight. Remove all oxide from all conductors and terminals before connecting wiring.

143mm

152mm

500-660 mm

(20-26 in)

300mm

19

Содержание PulseQ AC Home US Version









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды