Topdon Phoenix Pro Скачать руководство пользователя

Страница: 78 / 142

Phoenix Pro User Manual

8 Personal Center (More)

This function allows users to manage personal information and VCI connector.

8.1 My Report

This option is used to view, delete or share the saved reports.

Tap “

My Report

”, there are total 3 options available.

In case the DTC result is saved on Read Trouble Code page, the files will be
listed under

Health Reports

tab.

Fig. 8-1

• To select certain report, check the box before the report. To select all reports,

tap “Select All”. To deselect all, tap “Unselect”.

• To share the report with others, select the desired one and then tap “Share”.

• Select the desired report and then tap “Delete” to delete it.

• To change the filename of report, tap “Rename”.

If user records the running parameters while reading data stream, it will be
saved file and appear under

Recorded Data

tab.

Содержание Phoenix Pro















































































































































Результаты поиска

Содержание Phoenix Pro

Отзывы:

Похожие инструкции для Phoenix Pro

Бренды по названию

Популярные бренды

Topdon Phoenix Pro, Руководство пользователя

Результаты поиска

Содержание Phoenix Pro

Отзывы:

Похожие инструкции для Phoenix Pro

Бренды по названию

Популярные бренды