Technical Documentation
Page 12 of 26
4. ISO-UT:
OPUS A8 can be used as an ISO-UT slave in accordance with the ISO-11783
standard and DLG conformity.
5. Wachendorff Board Support Package (BSP):
Based on the operating system the Wachendorff BSP provides all the necessary
interfaces to control the internal functionality of the unit (e.g. activation of the display
backlight, processing key activation, etc.).
This software is ready installed on all OPUS A8 delivered together with the operation
system. For further information please refer to the
C/C++ Developer Guide.
6. Universal Downloader:
To download software from the PC to the terminal the Universal Downloader 4 is
provided. It supports a download via USB stick and Ethernet. The Universal
Downloader 4 also stores the software, installs it and restarts the application on the
terminal.
Please take notice of the following recommendation and prerequisites for the
computer used to the application design and /or programming:
- Using Projektor Tool and CODESYS© for the development it is recommended
to use the PC with Windows XP (or higher) operational system (for
CODESYS© it may by younger), at least 2 GB free hard disk capacity and 2
GB RAM. Serial port is recommended.
- Programming with C/C++ Linux operational system is prerequisite.
3.5 Development Kit
For programming the graphical user interface of the OPUS A8 some different
development kits are provided.
The operator panel OPUS A8 may only be handled due to the
according operation manual.
