Topcon SP-1P Скачать руководство пользователя

Страница: 85 / 92

MAINTENANCE

If all the stains cannot be removed, repeat this procedure a few times.

It is complete when stains can be wiped off finely. If the stains are still hard to remove, contact

your dealer or the TOPCON sales department.

CLEANING THE COVER

If the cover get soiled, wipe the surface with dry cloth.

If the cover is noticeably stained, wipe the surface with a damp cloth which is moistened in a

tepid water solution of neutral detergent.

CLEANING THE CONTROL PANEL

CONTAMINATION BY DUST

Remove the dust with a soft brush, and wipe with the attached monitor cleaner.

CONTAMINATION BY FINGERPRINTS

Wipe with the attached monitor cleaner.
If the stain still remains, moisten the monitor cleaner with water and then wipe off the stain.

CLEANING THE FOREHEAD REST AND CHIN REST

• Wipe the forehead rest and the chin rest with a cloth moistened with a tepid solution of neutral

detergent for kitchenware.

NOTE

• Don't wipe the photographing window using a commercial tissue, etc. This

may make the photographing window dirtier.

• Don't wipe the photographing window using gauze held with tweezers.

This may damage the surface of the lens or glass.

• Replace new applicator and repeat cleaning.

NOTE

Do not clean plastic parts with solvents. Benzine, thinner, ether and gasoline
may cause discoloring and decomposition.

NOTE

• As the control panel screen is a touch panel, be sure to turn off the

POWER switch before wiping. The touch panel will react and malfunction.

• When the monitor cleaner has become dirty, wash it. When washing, rinse

it thoroughly so no detergent is left. If the detergent is left, it may cause
uneven wiping.

Содержание SP-1P





























































































Результаты поиска

Содержание SP-1P

Отзывы:

Похожие инструкции для SP-1P

Бренды по названию

Популярные бренды

Topcon SP-1P, Руководство пользователя

Результаты поиска

Содержание SP-1P

Отзывы:

Похожие инструкции для SP-1P

Бренды по названию

Популярные бренды