Topcon MR-2 Скачать руководство пользователя страница 81

Страница: 81 / 83

Glossary

P/N: 1011907-01

• • • • • •

Glossary

BDS

–

BeiDou Navigation Satellite System maintained and operated by China. See also, BeiDou.

Base Station

– A GNSS receiver set up over a known point, which is used to derive correction information for

nearby Rover (mobile) GNSS receivers.

BeiDou

– Navigation Satellite System maintained and operated by China. See also, BDS.

GALILEO

– The satellite system currently being maintained and operated by the European Union (EU) and

European Space Agency (ESA).

GGD

– GPS + GLONASS Dual Frequency signal tracking.

GLONASS –

The GLObal NAvigation Satellite System maintained and operated by the Russian Federation.

GNSS –

Global Navigation Satellite Systems, such as GPS and GLONASS.

GPS –

The Global Positioning System maintained and operated by the United States Department of Defense.

– The primary L-band carrier used by GPS and GLONASS satellites to transmit satellite data.

– The secondary L-band carrier used by GPS and GLONASS satellites to transmit satellite data.

Light-Emitting Diode (LED)

– Used as indicator lights on the receiver to display the status of the receiver’s

components and control receiver operations.

MAGNET Field™

– Data controller software that is part of the MAGNET software system.

MAGNET Office™

– Post-processing and CAD solution software for surveying and grade application. It is part of

the MAGNET software system.

MINTER –

The receiver’s Minimum INTERface used to display and control data input and output.

Network RTK –

Collects satellite observations from the reference stations within the network and sends RTK

corrections to the Rover.

Option Authorization File (OAF) –

This enables the specific features that a customer purchases.

Phase Center of Antenna

– The point from which the electromagnetic radiation spreads spherically outward,

with the phase of the signal being equal at any point on the sphere.

Pocket-3D –

Field controller software by Topcon that supports both GNSS and TS.

Содержание MR-2



















































































Результаты поиска

Содержание MR-2

Отзывы:

Бренды по названию

Популярные бренды

Topcon MR-2, Руководство оператора

Результаты поиска

Содержание MR-2

Отзывы:

Бренды по названию

Популярные бренды