Topcon MR-2 Скачать руководство пользователя страница 8

Страница: 8 / 83

Preface

vii

P/N: 1011907-01

License Agreement

Use of any computer programs or software supplied by TPS or downloaded from a TPS website (the “Software”)

in connection with the Product constitutes acceptance of these Terms and Conditions in this Manual and an

agreement to abide by these Terms and Conditions, and any end user license agreement accompanying the

Product. The user is granted a personal, non-exclusive, non-transferable license to use such Software under the

terms stated herein and in any case only with a single Product or single computer. You may not assign or transfer

the Software or this license without the express written consent of TPS. This license is effective until terminated.

You may terminate the license at any time by destroying the Software and Manual. TPS may terminate the

license if you fail to comply with any of the Terms or Conditions. You agree to destroy the Software and manual

upon termination of the use of the Product. All ownership, copyright and other intellectual property rights in and

to the Software belong to TPS. If these license terms are not acceptable, return any unused software and

manual.

Confidentiality

This Manual, its contents and the Software (collectively, the “Confidential Information”) are the confidential and

proprietary information of TPS. You agree to treat TPS’ Confidential Information with a degree of care no less

stringent that the degree of care you would use in safeguarding your own most valuable trade secrets. Nothing

in this paragraph shall restrict you from disclosing Confidential Information to your employees as may be

necessary or appropriate to operate or care for the Product. Such employees must also keep the Confidentiality

Information confidential. In the event you become legally compelled to disclose any of the Confidential

Information, you shall give TPS immediate notice so that it may seek a protective order or other appropriate

remedy.

Website; Other Statements

No statement contained at the TPS website (or any other website) or in any other advertisements or TPS

literature or made by an employee or independent contractor of TPS modifies these Terms and Conditions

(including the Software license, warranty and limitation of liability).

Safety

Improper use of the Product can lead to injury to persons or property and/or malfunction of the product. The

Product should only be repaired by authorized TPS warranty service centers, or the Original Equipment

Manufacturer.

Miscellaneous

The above Terms and Conditions may be amended, modified, superseded, or canceled, at any time by TPS. The

above Terms and Conditions will be governed by, and construed in accordance with, the laws of the State of

California, without reference to conflict of laws.

Содержание MR-2



















































































Результаты поиска

Содержание MR-2

Отзывы:

Бренды по названию

Популярные бренды

Topcon MR-2, Руководство оператора

Результаты поиска

Содержание MR-2

Отзывы:

Бренды по названию

Популярные бренды