Topcon MR-2, Руководство оператора

Страница: 45 / 83

Configure the Receiver
36
P/N: 1011907-01
Configur
ation
Figure 41: Receiver Settings – Positioning
4. Set the following parameters then click OK to return to the Receiver Settings screen.
•
Positioning Mode – Select a positioning mode for the receiver.
•
Enable Solutions – Select solutions used in position computation.
– Standalone – Where the receiver computes 3D coordinates in autonomous mode without using
differential correction.
– Code Differential – Where the rover receiver computes the current relative coordinate in differential
mode using only pseudo ranges.
– RTK Float – Where the Rover receiver computes the current relative coordinates in differential mode
using both pseudo ranges and phases; however, with a float solution, the phase ambiguity is not a
fixed integer number and the “float” estimate is used instead.
– RTK Fixed – Where the rover receiver computes current relative coordinates, with ambiguity fixing, in
differential mode.
•
DION – Select the mode in which the DION engine will operate.
– Off – The DION engine is disabled.
– Local – The DION engine provides precise positioning with respect to a starting point.
– Smooth – The DION engine provides smoothed estimates of absolute positions using refined delta
positions from carrier phase processing.
5. Click OK to return to the Receiver Settings screen.