manualshive.com logo in svg

Topcon LN-100, Инструкция по эксплуатации

Поделиться
Скачать
Topcon LN-100 Скачать руководство пользователя страница 14

11

4. NOMENCLATURE AND FUNCTIONS

Displaying battery life

The battery life is low when the power LED is blinking in red and a beep sound (repeating beeps) is 
heard. Exchange the battery. The battery life of the instrument is displayed on the controller.

Refer to the instruction manual of the controller.

Laser plummet ON/OFF and brightness adjustment

The operation method of the laser plummet is as follows:

W-LAN LED

When it is Mode A

Connection waiting state: Blinking in green every 1 second

(repeating a cycle in which the LED 
is on for 1 second and then off for 
1 second)

Connecting:

Lighting up in green

When it is Mode B

Connection waiting state: Blinking in green quickly

(repeating a cycle of quick on twice, 
followed by 2 seconds off)

Connecting:

Lighting up in green

When an error is detected in the W-LAN setting item:

Lighting up in red

Laser plummet switch

Laser plummet ON: Press it
Laser plummet OFF: Press and hold (More than 1 second).

“Laser plummet ON/OFF and brightness adjustment” on 

page 11

Laser plummet/
Laser pointer LED

Off: Laser plummet or laser pointer is OFF
Blinking in green: Laser plummet or laser pointer ON

Auto leveling switch

Starts auto leveling: Press it while auto leveling is stopped.
Stops auto leveling: Press it again while auto leveling is being 

performed.

Extends the leveling screw:

Hold it down.

“Auto leveling” on page 18

Auto leveling LED

Blinking in green:

In auto leveling

Lighting up in green: Within the range of inclination 

compensation (±6 minutes)

Lighting up in red:

Outside the range of inclination 
compensation (±6 minutes or over)

Blinking in red:

Outside the range of auto leveling

Function

Description

Turn ON the laser plummet

Press the {laser plummet switch} for a short time.
The laser plummet lights up with the stored brightness.

Turn OFF the laser plummet

Hold down the {laser plummet switch} for at least 1 second or it 
turns OFF automatically about five minutes after the laser 
plummet is turned ON. The brightness used when the laser 
plummet turned OFF is stored.

Turn up the brightness

Pressing the {laser plummet switch} for a short time while the 
laser plummet is turned ON turns up the brightness by one level, 
up to level 5. After reaching level 5, it goes back to level 1.

Содержание LN-100






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды