manualshive.com logo in svg

Topcon LN-100, Инструкция по эксплуатации

Поделиться
Скачать
Topcon LN-100 Скачать руководство пользователя страница 11

8

3. LASER SAFETY INFORMATION

• Avoid setting the instrument at heights at which the path of the laser may strike pedestrians or 

drivers at head height. Operate the instrument with due caution to avoid injuries that may be caused 
by the laser beam unintentionally striking a person in the eye.

• Never point the laser beam at mirrors, windows or surfaces that are highly reflective. The reflected 

laser beam could cause serious injury

• Only those who have received training as per the following items shall use this product.

• Read this manual for usage procedures for this product.
• Hazardous protection procedures (read "LASER SAFETY INFORMATION")
• Requisite protective gear (read "LASER SAFETY INFORMATION")
• Accident reporting procedures (stipulate procedures beforehand for transporting the injured and 

contacting physicians in case there are laser-induced injuries). 

• Persons working within the range of the laser beam are advised to wear eye protection which 

corresponds to the laser wavelength of the instrument being used.

• Areas in which the laser is used should be posted with a standard laser warning sign.
• When using the laser-pointer function, be sure to turn OFF the output laser after distance 

measurement is completed. Even if distance measurement is canceled, the laser-pointer function is 
still operating and the laser beam continues to be emitted. 

Содержание LN-100






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды