Topcon KR-1W, Инструкция по эксплуатации

Страница: 118 / 188

116
FUNCTION SETTING USING SETTINGS SCREEN
SETTING AUTO PRINT
After measuring the right and left eyes under auto mode, the results can be printed automati-
cally by the internal printer. Before shipment, the default setting is "ON" (Auto Print).
1
Tap the Set Condition button of the set item display "Auto Print" of "INITIAL."
2/ 3
6
SETTINGS
01
ON
OFF
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
Zernike Degree
Auto Print
Internal Printer
External Printer
Patient ID Reset
Patient ID
Patient ID Out TV
KR No.
KR Out TV
OFF
USE
OFF
ON
-SET-
ON
OFF
2
Tap the Setting Change button and select "ON" (Auto Print is performed) or "OFF"
(Auto Print is not performed).
3
Setting is complete.
If the eye to be measured is set to the right/left eye only, the auto print function will
not be performed. For the setting of the eye to be measured, see "MEASURING
ONE EYE ONLY" on page 35.
SETTING THE THERMAL PRINTER (INTERNAL PRINTER)
The internal thermal printer can be set. Before shipment, the default setting is "Use." When
the setting is "Do not use," printing is not performed even by tapping the DATA OUT button .
1
Tap the Set Condition button of the set item display "Internal Printer" of "INITIAL."
2
Tap the Setting Change button and select "USE" or "OFF."
2/ 3
SETTINGS
USE
OFF
4
01
MEASURE
INITIAL
DISPLAY
PRINT INT
PRINT EXT
COMM
NETWORK
SPECIAL
EXIT
Zernike Degree
Auto Print
Internal Printer
External Printer
Patient ID Reset
Patient ID
Patient ID Out TV
KR No.
KR Out TV
OFF
USE
OFF
ON
-SET-
ON
OFF
3
Setting is complete.