Surveying with the Receiver
P/N 7010-0713
3-15
and High correspond to the indicator's 95%, 99.5% and
99.9% states, respectively. The higher the specified
confidence level, the longer the integer ambiguity search time
6. Click the
Ports
tab and set the following parameters for the serial
port (Figure 3-12):
•
Input
drop-down list – select the desired differential
correction format.
•
Period (sec)
– leave as is.
•
Baud rate
drop-down list – select a baud rate (i.e., the rate at
which differential messages will be transmitted from modem
to receiver).
•
RTS/CTS
– select to enable handshaking.
TIP
TIP
Use a 38400 baud rate.
Figure 3-12. Rover Configuration – Ports
7. Click
Apply
.
8. Click
OK
to close the
Receiver Configuration
dialog box.
Содержание HiPer XT
