Topcon GLS-1500 Series, Инструкция по эксплуатации

Страница: 21 / 88

2-4
2 PREPARATIONS BEFORE USE
2
Match the PC setting to the instrument setting. *1)
Or
Match the instrument setting to the PC setting. *2)
*1) Refer to “PC settings (OS: For Windows XP)”(P5-8) for PC
settings.
*2) To change the mode, authorization, SSID, WEP, IP address, and subnet mask of the instrument,
refer to "5.2.2 Network setting (To connect to PC or access point)."
Connecting with Infrastructure mode
1
Move to the network setting screen.
Refer to Chapter 5.2.2 “Network Settings (To connect to PC or access point)”
2
Match the instrument setting to the access point setting. *3)
Or
Using a PC, match the access point setting to the instrument setting. *4)
*3) To change the mode, authorization, SSID, WEP, IP address, and subnet mask of the instrument,
Refer to Chapter 5.2.2 “Network Settings (To connect to PC or access point)”.
*4) Refer to the wireless LAN access point instruction manual for setting on the access point side.
z Connection via USB cable
1
Connect a Mini-USB cable to the USB connector.
The USB connection is automatically recognized and [PC CONTROL MODE] is displayed.
[Reference: factory settings of the instrument]
MODE : AD-HOC
AUTH : OPEN
SSID : gls1500
WEP :
IP address : 192.168.0.1
subnet mask : 255.255.255.0
USB connector
USB connector is for connection to PC, and USB memory cannot be connected.