Topcon GLS-1000 SERIES, Инструкция по эксплуатации, Страница: 60 / 76

8-3
8 Scanning
3
Input target name [pt01].
Input
target
name
4
Press the [ENT] key.
[ENT]
5
Aim to a target [pt01] by using Horizontal/Vertical
jog.
6
Press the [ENT] key.
Aim to
target
[pt01]
[ENT]
7
Press the [ENT] key.
Scanning starts.
REMAIN: remaining time of the scan
[ENT]
Target scanning is finished.
8
When target scan is correctly completed, an end
message will be displayed. Then, press the [ENT]
key. *1) *2)
9
The mirror will rotate toward the target. Look into
the sighting collimator and confirm the position of
the target that was scanned.
When the target is correctly collimated, select the
F1 (FINISH) key.
When the target is not correctly collimated, there is
a possibility of a reflecting object other than the
target being scanned. Select either the F2
(REVOKE) or F3 (SCAN AGAIN) key and redo.
[ENT]
[F1]
[pt01] target scanning is finished.
10
Press the [F2](TARGET SCANNING) key to input
the target name.
[F2]
11
Input the target name [pt02].
Input
target
name
TARGET SCANNING
TARGET NAME INPUT
[pt01 ]
NUME <-
TARGET SCANNING
AREA SELECT
AIM TO TARGET
AND PRESS ENT KEY
TARGET SCANNING
SCAN START
PRESS ENT KEY
TARGET SCANNING
SCANNING IN PROGRESS
REMAIN 10S
TARGET SCANNING
FINISHED
PRESS ENT KEY
TARGET SCANNING
PLEASE PEEP TARGET
F1 FINISH F2 REVOKE
F3 SCAN AGAIN
SCAN MENU
F1 3D SCANNING
F2 TARGET SCANNING
TARGET SCANNING
TARGET NAME INPUT
[ ]
NUME <-
TARGET SCANNING
TARGET NAME INPUT
[pt02 ]
NUME <-