Topcon AGA5495, Руководство оператора

Страница: 46 / 144

5.1. Setting features
28
5.1. Setting features
The Features menu option provides the following menu items:
5.1.1. Guidance setup
Sets the guidance system functionality.
To set up guidance features:
1. Select
System / Features / Guidance .
Guidance
This is a standard feature of the console and cannot be disabled.
Auto steer
Enables auto steering and can only be used on vehicles fitted with an
auto steering system such as the AES-25.
Guidelines (AB lines, identical curves...)
The four guideline types (AB lines, identical curves, pivots and
guidelock) are all enabled by default. If some guideline types are not
required, they can be disabled. It is not possible to disable all
guideline types at the same time. Refer to Guideline Menu, page 89.
5.1.2. Implement setup
Sets up the functionality for the attached implement.
To set up implement functionality:
1. Select
System / Features / Implement .
Auto section control
Permits the system to turn sections on for new areas to be covered
and off for areas that have already been covered.
Refer to AGA4372 Sprayer operator manual for more information.
Lock setup menu when master switch is on
Disables access to the setup menu when the master switch is on.