Top Tronic T1151, Инструкция по эксплуатации

Страница: 23 / 28

PREPARATION FOR USE
Fuses:
In doubt, check the fuses using a ohm meter.
Please note that this instrument will not indicate anything, should the fuses
be blown.
Please note that this instrument will be unsafe if the fuse is blown as no
indication will be shown and nothing will be detected by it.
For that reason,
.
Test Leads:
Check the test leads for defects or cracks. Replace if cracked or damaged.
Only replace with the same type. Use the Continuity test to check, with the
fuse(s), that the complete circuit is in good condition.
Cleaning:
Use a damp cloth to clean the case. Do not use chemicals
REPLACE BATTERIES
This instrument operate well with Alkaline 1.5V or rechargeable 1.2V
batteries. It could be operated with inferior batteries too. It use 8 of them. To
replace the batteries, disconnect the test leads, then unscrew the bottom
battery cover and replace the batteries.
DISPOSING OF BATTERIES
Only dispose of batteries into a purposely dedicated disposal system. Do not
dispose to the wrong place. Look after your environment, please.
FUSES REPLACEMENT
Unscrew the back cover and replace the faulty fuse with the same type, then
screw the cover back into place correctly
you must verify the fuse Before and after any test
-21-