Top Tronic T1151, Инструкция по эксплуатации

Страница: 18 / 28

VERY IMPORTANT AUTOMATIC FEATURES
Automatic Vac-dc Detect.
All of these testers in this family have the capability to detect Voltage AC and
DC.
This is done with the use of the internal safety voltmeter which does this
work.
However,
So, you must ensure that the lest leads are doing a perfect contact before
beginning any test and before selecting any function. That contact must
remain secure during the entirety of the tests on a particular circuit.
We recommend you to use clip-on alligators and not the tips only, so that you
can make sure the test leads are making a proper contact during the all
duration of the tests.
Should the test leads not make contact at any time before, during and after
the test, all the safety features of these testers will not functions.
Automatic Discharge of Capacitive and inductive Circuits
These testers will discharge automatically all circuits charged by the tester,
after a test is done, again, this will only be activated if the test leads make
contact at any time before, during and after the test.
Once a test is finished, the testers will automatically discharge capacitive or
inductive circuit of their charge. The discharge can be observed on the
display, in the form of a bar-graph. Again, do not disconnect the leads while
discharge. Wait until completion of the discharge before removing any lead.
During Discharge, the Buzzer will beep and the bar-graph will show some
voltage. With some high charges, this may takes some time. Be patient and
let the instrument discharge completely before proceeding to removing the
leads.
this feature will only work if the test leads are securely
connected to the circuit under test.
It's your responsibility to ensure proper contact of the leads at all times.
It's your responsibility to ensure proper contact of the leads at all times.
Auto-off
This family of instruments has an Auto-off feature which will switch off the
tester, should no key or function be in use. Please, again, note that if voltage
is present on the leads, the instrument will warn the user of that and the
auto-off feature will be inactive until dangerous voltage has been removed
from the circuit.
-16-