Top Craft TAC-18/3, Руководство пользователя

Страница: 8 / 32

08 Topcraft
• It is normal for the battery and the charger warm up slightly during the charge:.
• The time of charge is approximately 1 hour.
• At the end of the charge, disconnect the charger and extract the battery.
Inserting and removing batteries
Verifies that the outside surfaces of the battery and the selected tool are clean
and dry before connecting a battery.
• Make sure that the On/Off switch is Off (for the drilling machine, the direction selector
must be in middle position).
• Insert the battery in the tool, ensuring that the polarities are aligned. A click will be
heard when the battery is correctly inserted in the bottom of the housing.
• To take out the battery, press on the buttons located on both sides of it. Remove the
battery by drawing it in the axis from its housing.
3. JIGSAW
Technical specifications
• The level of protection against electromagnetic disturbances and level of immunity are
in conformity with the European directives.
• When the acoustic pressure exceeds the value of 85 dB (A), it is necessary to wear
individual ear plugs or other ear protection devices.
Use of the apparatus
• The jigsaw should be used only for cutting materials such as wood, plastic, or thin
metal sheets.
• Never use your hand to remove the chips or wood residues. Switch off the machine
and wait for the blade to completely stop before performing this task.
• Before beginning work, check for the presence of nodes, points, or dangerous
deposits. Remove if necessary.
• Pay attention to the wood or material that falls: remain concentrated at the end of the
cut.
Supply voltage 18V continuous
Capacity battery 1.3 Ah
Autonomy 1h
Number of movements of the blade 1700/min
Maximum cutting depth in wood 50 mm
Maximum cutting depth in metal 3 mm
Angle of adjustable cut 0 to 45°
Pressure level acoustic (Lpa) 81.1 dB (A)
Level of power acoustic (Lwa) 92.1 dB (A)
Level of vibrations 2.606 m/s 2
GB