Top Craft TAC-18/3 Скачать руководство пользователя страница 7

Topcraft

07

Do not continually use the fast charge option (model equipped with the fast charging
option). Do not recharge after using it for only a short time.

Never let the batteries discharge completely. Recharge them from time to time if the
appliance is inactive for a long period of time.

Fully charge a new battery before use. 

Bad storage or charge conditions will cause damage to the batteries. Always respect
the recommended charging times.

Protect the charger against moisture. It should be only used in dry locations.

The charger TACL-18/3 should be used exclusively to charge battery of type TACB-18.

The ventilation openings of the charger must always be clear.

If the electrical cord of the charger is damaged, it must be replaced by the
manufacturer, customer service, or a person of similar qualification, in order to avoid
danger.

Never use the charger to charge normal batteries.

2. CHARGER

Technical specifications

The level of protection against electromagnetic disturbances and the level of immunity are
in conformity with the European directives.

Charge a battery

Check for the absence of metallic objects in the battery compartment of the charger.

Insert the battery to be charged in the charger, checking the polarities. The poles of
the charger and the  battery are located by the signs + and -.

Check that the voltage of the power source is the same as indicated on the
identification plate of the  charger.

Note: 

Before every use, check the state of the charger, from its plug to its cord. If it is

defective or damaged, the charger must be discarded or repaired by a qualified person. 

Connect the plug of the charger to a wall outlet.

When charging has started the red indicator light will appear. 

When the battery is completely charged, the green indicator light will appear. The
charge must be stopped.

Supply voltage

230 V~ 

(alternate)

50 Hz 

Output voltage

18 V (continuous)

Assigned power

70 W

Assigned output current

2 A (continuous)

Time of recharge

1h

GB

Содержание TAC-18/3

































Отзывы: