TOP CNC
Machine No: DB1802020101
Machine Model: TC-1631A
20
VII. Warning
I. Without the company's permission for private demolition, all the consequences of the private
change of the machine caused by the customer at the same time, at the same time the company
terminated all services after sale.
II. The company will only provide paid service if the return receipt is returned to the company and it
proves that you have carefully read this manual, the fault caused by improper repair and repair, and
the wrong use beyond the scope of use.
III. The customer is responsible for the damage caused by the lack of phase in the other power
equipment.
IV. If the machine smokes, emits odors, noise, etc., please cut off the power immediately and do not
use it.
As shown in Figure 6, ensure that the machine is reliably grounded.
V. Do not use corrosive liquids to clean machine parts and keyboards.
VI. According to different points carved material and engraving depth to select the appropriate tool
and set the appropriate feed rate (the tool should be manually rotated after the spindle to observe
the tool is vertical and concentric if not vertical concentric should re-install or replace the tool).
VII. Rotate the tool before performing Z-axis positioning and engraving output.
VIII. Before each engraving operation, please be sure to check whether the spindle cooling water
circulation is smooth, so as not to burn out the spindle (cooling water should be replaced in time
when the spindle temperature is high).
IX. Don't destroy or replace the original power cord arbitrarily. Do not make the power cord
excessively bent, pulled, bundled, or pressed under heavy objects.
X. Do not touch the tool and the spindle part by hand during the working process of the machine.
XI. The machine cannot penetrate the liquid, fell into the metal parts. After each engraving, the
machine should be cleaned in time to remove chips and dust. Lubricate the screws, bars, guide rails,
and racks regularly. keyboard.
