manualshive.com logo in svg

TOOLINE HY70i, Руководство пользователя, Страница: 43 / 45

Поделиться
Скачать
TOOLINE HY70i Скачать руководство пользователя страница 43

 

 

 

 

 

  

 

 

 

 

 

 

 
 

 

 

 

 

13.2)

 

Assembly

 

Accessories

 

 

NOTE

 

 

Do not operate the generator without the wheels 

and supports, otherwise the air filter will get 
damaged.

 

 

The following accessories are supplied with 

      the generator:

 

No.        Parts                        Quantity

 

 

1.           Wheel                            2

 

 

2.           Shaft                              2  

 

3.           R cotter pin                   2

 

 

4.           Support                         2

 

 

5.           M6*40 Bolt                    4

Assembly  procedure:

13.2.1) Stop the generator, and lift it up (refer to 

 

transporting chapter).

 

13.2.2) Put one wheel through a shaft, and then 

 

insta

ll them into the whe

el base of the 

 

generator.

 

13.2.3) Lock the end of the shaft with R cotter pin.

 

13.2.4) Install one support with two bolts using 

 

10mm spanner.

 

13.2.5) Install another wheel and support, refer to 

 

the steps 13.2.2)~13.2.4),

<<40>>

Содержание HY70i














































Отзывы:

Нет отзывов